Demister pads for boilers of sugar mills are designed with high temperature resistance, chemical inertness and excellent filtration efficiency.

Demister Pad for Sugar Factory
Diameter of demister pad 2000 mm
Thickness of pad: approx 150 mm ( 6 inch )
Density of pad: 80 kg/m3
Material : SUS 304
For 2 bodies of 1st effect quintuple effect evaporator of Diameter 5500 mm and ht above calandria 8000 mm

SPECIFICATION OF Demister Pads FOR 1x40 T/Hr BOILER OF SUGAR MILLS

DESIGN PARAMETERS:

To be installed in boiler steam drum for separating the water droplets from saturated steam.

Steam flow rate: 40 ton/hr. (Normal)
Operating pressure: 44-45 Kg/cm2
Operating temperature: 265 °C
Liquid density: 788 Kg/M3
Vapour density: 22.7 Kg/M3

DEMISTER PADS SPECIFICATIONS:
Mesh type: Koch 4120 or vicote x 380 or equivalent
Material: AISI304
Density: 192 Kg/M3
Surface area: 377 M2
Voids: 97.6 %
Wire surface area: 350 FVI2/M3
Wire thickness: 0.23 mm and 0.28 mm
Size:
1414 x 225 x 100
707 x 225 x 100

NOTES:
- Maximum allowable vapour velocity through demister pads
-The supporting grids are excluded from scope of vendor supplies.
-We supply technical recommendations regarding the suitability of quoted demister pad.
-Technical support with relevant catalogues, brochures and drawings.

PERFORMANCE OC EQUIPMENTS:
The efficiency of demister pads is greater than 99 %.